We're aware of a problem when trying to use Zero Data to link to Healthify. Zero Data is managed by Health NZ and we're working with them to get this fixed.

How to use a pulse oximeter in adults

Key points about using a pulse oximeter for adults

A pulse oximeter is a small device that fits on your finger and quickly and easily checks your oxygen levels and heart rate.
The information on this page is for the use of a pulse oximeter in adults. For use in children, see how to use a pulse oximeter in children.

Print this page

A pulse oximeter is a small, painless device that clips onto your finger and uses light beams in a sensor to estimate the amount of oxygen in your blood without taking a blood sample. This helps to track and assess how well your lungs are working.

Note: There is a different page on how to use a pulse oximeter in children.

Note: Be aware that the quality and accuracy of different pulse oximeters can vary.

A pulse oximeter measures 2 things:

Pulse – this is a measure of how fast your heart is beating. Your pulse is measured in beats per minute (bpm). On your device this number may show as bpm or PRbpm (pulse rate/beats per minute).
Oxygen saturation level – this is a measure of how much oxygen is in your blood. Your oxygen saturation is measured as a percentage (scored out of 100). On your device this number may show as SpO₂% (saturation percentage of oxygen).

A pulse oximeter can be used to help monitor a range of conditions in hospital or at home, including COVID-19 infection. COVID-19 is a viral infection. For most people, the symptoms are relatively mild, and they usually get better over 2–3 weeks. However, for some people, the symptoms can be very serious and can get worse quickly.

Your healthcare team will let you know if you need a pulse oximeter at home
If you are advised to monitor your symptoms and breathing, then the use of a health and symptom diary [PDF, 615 KB] can help you and your healthcare team track any changes.

This page will explain how to use a pulse oximeter, what the numbers mean and what actions you should take.

If at any time you experience shortness of breath at rest or difficulty breathing, or your symptoms become suddenly worse, call 111 for an ambulance.

There are different brands of these devices – please read the manufacturer's instructions. The following video and table provides a general guide. Ask your healthcare team if you have any questions.

Video: How to use a pulse oximeter

Click the image below to play the video. This video may take a few moments to load.

[MP4, 22 MB]

(Healthify He Puna Waiora, NZ and Aotearoa Collaborative, NZ, 2021)

View transcript [DOCX, 37 KB]

You can also watch this video directly on Youtube(external link).

How to use a pulse oximeter – a general guide
Preparing Wash your hands and remove any nail polish or false nails. This allows the light beams in the sensor to measure through your fingernail. Make sure you have been resting for at least 5 minutes before taking the reading. If your hands are cold, warm them by rubbing them together. Rest your arm and hand and keep them still while taking your reading. Your hand should be at waist level, such as resting your hand on a table or the arm of your chair. Taking your reading Switch the pulse oximeter ON and the display will light up. Squeeze to open and insert your finger until your fingertip touches the end. It works best on the middle or index finger of either hand. Keep your hand still and wait for 1 to 2 minutes until your pulse (bpm/PRbpm) is steady and your oxygen saturation (SpO₂%) number has not changed for 5 seconds or more. If your numbers are not steady, try a different finger. Recording your numbers You should record the oxygen saturation number ‘SpO2%’ and the pulse rate number ‘PRbpm’ to track any changes. Here is a diary [PDF, 615 KB] you can print and fill in. Your heart rate and oxygen level numbers are easy to mix up. Be careful to record these correctly. Measure and record your pulse (heart rate) and oxygen level 3 times a day at about the same time every day. See the table below on what the pulse oximeter numbers mean and when to seek advice from your healthcare team. Your symptom diary is crucial to track any changes so your healthcare team can monitor you safely at home. You should take extra measurements if you feel a change in your health. To clean your device, check the manufacturer’s instructions.

How to use a pulse oximeter – a general guide

Preparing

Wash your hands and remove any nail polish or false nails. This allows the light beams in the sensor to measure through your fingernail.
Make sure you have been resting for at least 5 minutes before taking the reading.
If your hands are cold, warm them by rubbing them together.
Rest your arm and hand and keep them still while taking your reading.
Your hand should be at waist level, such as resting your hand on a table or the arm of your chair.

Taking your reading

Switch the pulse oximeter ON and the display will light up.
Squeeze to open and insert your finger until your fingertip touches the end.
It works best on the middle or index finger of either hand.
Keep your hand still and wait for 1 to 2 minutes until your pulse (bpm/PRbpm) is steady and your oxygen saturation (SpO₂%) number has not changed for 5 seconds or more.
If your numbers are not steady, try a different finger.

Recording your numbers

You should record the oxygen saturation number ‘SpO2%’ and the pulse rate number ‘PRbpm’ to track any changes. Here is a diary [PDF, 615 KB] you can print and fill in.
Your heart rate and oxygen level numbers are easy to mix up. Be careful to record these correctly.
Measure and record your pulse (heart rate) and oxygen level 3 times a day at about the same time every day. See the table below on what the pulse oximeter numbers mean and when to seek advice from your healthcare team.
Your symptom diary is crucial to track any changes so your healthcare team can monitor you safely at home.
You should take extra measurements if you feel a change in your health.
To clean your device, check the manufacturer’s instructions.

Your healthcare team will give you details on appropriate oxygen saturation levels for your specific medical condition. The following is a guide for adults with no previous lung conditions.

Oxygen saturation SpO2%	Pulse rate (bpm or PRbpm)	Action
95–100	50–99	✔ Acceptable
92–94	100 –119	Seek advice from your COVID-19 healthcare team
Below 92	120 or more	Call 111 for urgent medical care

Do not rely only on a pulse oximeter to assess your health condition or oxygen level. It is only a measurement device.

Other signs or symptoms of low oxygen levels are:

bluish colouring in your face, lips or nails
shortness of breath, difficulty breathing or a cough that gets worse
restlessness and discomfort
chest pain or tightness
fast or racing pulse rate.

If you have any concerns or questions, contact your healthcare team directly.

If at any time you experience any of the symptoms above, or your symptoms become suddenly worse, call 111 for an ambulance.

Pulse oximeters are very useful devices but it is important to remember that there are limitations to their use.

Be aware that lots of different factors can affect the accuracy of a pulse oximeter reading. These include poor circulation, skin pigmentation/colouring, skin thickness, skin temperature, current tobacco use, use of fingernail polish or artificial nails, tattoos and dyes, and maintenance and cleaning of devices.
Also be aware not all pulse oximeters are of the same quality and accuracy.

If you have any breathing problems or concerns, phone your healthcare team or HealthLine 0800 611 116 for advice. Do not rely on a pulse oximeter alone to assess your health condition or oxygen level, it is only a measurement device.

How to use a pulse oximeter in children
COVID-19 positive – care at home for adults
COVID-19 Management topics
Home oxygen therapy
COPD | Mate ia tuku

Pulse oximetry(external link) British Lung Foundation, UK